![]() For example, the following picture shows that the offset is X0.00 Y3.00. The console will print the offset distance in the form of M1111 Xxxx Yxxx. (2) Go back to the console and click the IR_OFFSET_DET button to query the offset of the red cross spot under the current laser height. Click Move, enter the distance value, and click the down arrow to focus the laser module. For example, the following picture shows a Z distance of 38.827. (1) On the console, you can find the Z distance from the material to the laser module in the form of M313 Zxxx, xxx is the distance. Therefore, you need to set the offset of the red cross spot under the current laser height so that the machine can automatically compensate for the offset during processing. However, the position of the red cross spot does not exactly coincide with the laser spot. When xTool S1 is idle, its laser module emits a red cross spot to help you locate the laser module. Click the DETECT button, and xTool S1 will perform auto focus. The slats or honeycomb panel can reduce the burned area on the back of the material and protect the baseplate.Ĭlick Console on the right side of LightBurn. Note: To cut a material, you are advised to place the slats or honeycomb panel on the baseplate before placing the material. Download the configuration file for xTool S1 : xTOOL_S1_V2.lbdev. ![]() To fully explore all the features of xTool S1, please use XCS (xTool Creative Space), the official software of xTool. Features such as laser module position, marking processing area, and processing curved materials are not supported.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |